14 Disposal
In order to reduce the environmental load over the product’s entire lifecycle,
Planmeca’s products are designed to be as safe as possible to manufacture,
use and dispose of.
Parts which can be recycled should always be taken to the appropriate
processing centers, after hazardous waste has been removed. Disposal of
obsolete units is the responsibility of the waste possessor.
All parts and components containing hazardous materials, as well as
batteries, must be disposed of in accordance with waste legislation and
instructions issued by the environmental authorities. Batteries must be
disposed of in compliance with the requirements of Directive 2006 / 66 /
EEC.
The risks involved and the necessary precautions must be taken into
account when handling waste products.
Part Main materials for
disposal
Recyclable
material
(X) = if available
Waste disposal
site
Hazardous waste
(separate
collection)
Frame, covers &
patient supports:
metal
Aluminium X
Galvanised steel X
Lead X
Frame, covers &
patient supports:
plastic
PUR X
Other plastic X
Motors (X)
Component
boards
(X)
Cables,
transformers
Copper X
Steel X
Transformer oil X
X-ray tube
Packing Wood X
Cardboard X
Paper X
Polystyrene X
Sensor Return sensor to Planmeca.
Other parts X
14 Disposal
User's manual Planmeca ProMax 109
To Next Page
Loading...
