6.4.2 Positioning patient’s head
1. Press the temple support button to open the temple supports if they are
not already open.
2. Guide the patient to the X-ray unit.
3. Adjust the X-ray unit to suit the height of the patient. To do this, press
either of the height adjusting buttons until the chin rest is approximately
level with the patient’s lower jaw.
4. Ask the patient to step forward, grasp the patient handles, stretch and
straighten their back and neck, and bite the bite piece. The upper and
lower incisors must be in the groove in the bite piece.
6 Panoramic exposure
User's manual Planmeca ProMax 43
To Next Page
Loading...
