4 Programs
The X-ray unit uses SCARA (Selectively Compliant Articulated Robot Arm)
technology for arm movements.
Planmeca ProMax 2D S3 and Planmeca ProMax 3D X-ray units have three
joints (S3 = SCARA 3) and allow limitless imaging possibilities. Planmeca
ProMax 2D S2 X-ray units have two joints (S2 = SCARA 2) and offer a more
limited selection of imaging programs.
NOTE
The image width and height depend on the X-ray unit model and sensor.
The images shown here are only examples.
4.1 Panoramic programs
4.1.1 Standard
The standard panoramic program has a traditional path and angles of the
beam.
4.1.2 Bitewing
This program produces bitewing images from premolar and molar areas
including parts of maxilla, mandible and rami. The bottom of the maxillary
sinus as well as the mandibular canal and the mental foramen are also
visible.
4 Programs
22 Planmeca ProMax User's manual
To Next Page
Loading...
