CAUTION
Do not drop the sensor. Planmeca limited warranty does not cover damage
which is due to misuse, e.g. dropping the sensor, neglect, or any cause
other than ordinary use.
Do not use the sensor if the shock indicator (1) is red - contact your service
technician for help.
If you have any reason to believe that the sensor might be faulty, take a test
exposure before taking a patient exposure.
5.2 Attaching sensor to C-arm
1. Push the sensor onto the connector on the C-arm.
5 Preparations for exposure
30 Planmeca ProMax User's manual
To Next Page
Loading...
