Planmeca ProMax 2D - Interproximal; Orthogonal

NOTE
This program is optimised for interproximal imaging and a shadow of the
opposite side teeth may therefore be visible in the image.
4.1.3 Interproximal
The basic imaging geometry is the same as in the standard panoramic
program but the X-ray beam is more parallel to the interproximal contacts of
the teeth.
NOTE
This program is optimised for interproximal imaging and a shadow of the
opposite side teeth may therefore be visible in the image.
4.1.4 Orthogonal
The basic imaging geometry is the same as in the standard panoramic
program but the X-ray beam is perpendicular to the jaw.
4 Programs
User's manual Planmeca ProMax 23