• Select this button to position the C-arm around the patient support table.
This is the traditional closed patient entry position.
NOTE
If needed, the full view position (top button) can be disabled (Settings > User
> 1300 Operational settings > 1330 Patient positioning > Side entry OFF).
This might be necessary if there is no space for the C-arm to move back.
NOTE
Planmeca ProMax 2D S2 X-ray units offer only one patient entry position.
This entry position is the closed patient entry position where the C-arm is
positioned around the temple supports.
6 Panoramic exposure
42 Planmeca ProMax User's manual
To Next Page
Loading...
