NOTE
If you have any reason to believe that the C-arm might hit the patient during
exposure (e.g. patients with wide shoulders), take a test exposure without
radiation first. To turn radiation off, select Settings > User > 1300
Operational settings > 1310 Use Mode > 1311 Set Demo Mode.
NOTE
Do not touch the arm structures when the X-ray unit is moving.
NOTE
Patients are not allowed to hang on the patient handles.
NOTE
FOR PROFACE SENSOR:
Do not touch the glass windows. Fingerprints or other stains on the glass
surface destroy image quality.
1 Introduction
6 Planmeca ProMax User's manual
To Next Page
Loading...
