Polycom CX5100 Administrator's Guide

Polycom CX5100 Unified Conference Station for Microsoft Skype for Business - Administrator Guide
Polycom, Inc. 10
Desktop Client Microsoft Skype for Business 2016
Microsoft Skye for Business for Mac, version 16.x.x
Microsoft Skype for Business 2015
Microsoft Lync 2013 or Skype for Business 2013 (recommended)
Microsoft Lync 2010
Microsoft Lync for Mac 14.3.3 (160216), with native Safari web access
Processor Basic Video Transmit – 2.0 GHz or higher
HD Transmit – Quad cores, 2.0 GHz or higher
For the Skype for Business 2015 client, you can find detailed system requirements on the
Skype for Business Server 2015 page.
For the Skype for Business 2013 client, you can find detailed system requirements on the
Skype for Business Server page.
RAM 2 GB
Hard drive space 1.5 GB
Video card Minimum 128 MB RAM with support for full hardware acceleration
Monitor Minimum 1024 x 768
USB Connector A USB 3.0 port is required for 1080p calling. Connecting the unified conference station to
a USB 2.0 or USB 1.0 port can result in reduced performance.
Note: If you use a third-party USB extension cable to increase the distance between the CX5100
unified conference station and the PC, be aware that most extension cables limit the data rate or
provide only USB 2.0 performance, even when plugged into a USB 3.0 port.
When you connect the CX5100 to your computer using a USB 2.0 port, a warning message stating
that your system can run faster displays.
Minimum Computer Hardware and Software Requirements (Continued)
Category Requirements

Polycom CX5100 Specifications

General

Product type	Group video conferencing system
Product color	Black
Number of persons	- person(s)
Megapixel	2 MP
Sensor type	-
Image sensor size	- \
Supported video modes	1080p
Supported graphics resolutions	352 x 288, 640 x 480 (VGA), 1056 x 144, 1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Frequency range	160 - 22000 Hz
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	15 - 85 %
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	110 W
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Ethernet LAN	Yes
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	325 mm
Width	369 mm
Height	348 mm
Weight	2300 g
Package depth	430 mm
Package width	520 mm
Package weight	9070 g