Polycom CX5100 Administrator's Guide

Configuration Parameters
Polycom, Inc. 70
<dot1x><eapollogoff/>
The next table lists configurable parameters.
If 0, authentication of RTP is offered. If 1, no authentication of RTP is offered; a session description that includes the
UNAUTHENTICATED_SRTP session parameter is sent when initiating a call.
sec.srtp.sessionParams.noAuth.require
1
0 or 1 0
If 0, authentication of RTP is required. If 1, no authentication of RTP is required; a call placed to a system configured
with this parameter must offer the UNAUTHENTICATED_SRTP session parameter in its SDP. If this parameter is set
to 1, sec.srtp.sessionParams.noAuth.offer is also set to 1, regardless of the value in the configuration file.
sec.srtp.sessionParams.noEncrypRTCP.offer
1
0 or 1 0
If 0, encryption of RTCP is offered. If 1, no encryption of RTCP is offered; a session description that includes the
UNENCRYPTED_SRTCP session parameter is sent when initiating a call.
sec.srtp.sessionParams.noEncrypRTCP.require
1
0 or 1 0
If set to 0, encryption of RTCP is required. If set to 1, no encryption of RTCP is required; a call placed to a system
configured with noAuth.require must offer the UNENCRYPTED_SRTCP session parameter in its SDP. If this
parameter is set to 1, sec.srtp.sessionParams.noEncryptRTCP.offer is also set to 1, regardless of the
value in the configuration file.
sec.srtp.sessionParams.noEncrypRTP.offer
1
0 or 1 0
If 0, encryption of RTP is offered. If 1, no encryption of RTP is offered; a session description that includes the
UNENCRYPTED_SRTP session parameter is sent when initiating a call.
sec.srtp.sessionParams.noEncrypRTP.require
1
0 or 1 0
If 0, encryption of RTP is required. If 1, no encryption of RTP is required. A call placed to a system configured with
noAuth.require must offer the UNENCRYPTED_SRTP session parameter in its SDP. If set to 1,
sec.srtp.sessionParams.noEncryptRTP.offer is also set to 1, regardless of the value in the configuration file.
sec.srtp.simplifiedBestEffort 0 or 1 0
If 0, no SRTP is supported. If 1, negotiation of SRTP compliant with Microsoft Session Description Protocol Version
2.0 Extensions is supported.
1
Change causes system to restart or reboot.
802.1X EAP over LAN (EAPOL) Logoff Parameters
Parameter Permitted Values Default
sec.dot1x.eapollogoff.enabled
1
0 or 1 0
If 0, the system does not send an EAPOL Logoff message on behalf of the disconnected supplicant. If 1, the feature is
enabled and the system sends an EAPOL Logoff message on behalf of the disconnected supplicant connected to the
system’s secondary (PC) port.
sec.dot1x.eapollogoff.lanlinkreset
1
0 or 1 0
SRTP Parameters (continued)
Parameter Permitted values Defaults

Polycom CX5100 Specifications

General

Product type	Group video conferencing system
Product color	Black
Number of persons	- person(s)
Megapixel	2 MP
Sensor type	-
Image sensor size	- \
Supported video modes	1080p
Supported graphics resolutions	352 x 288, 640 x 480 (VGA), 1056 x 144, 1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Frequency range	160 - 22000 Hz
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	15 - 85 %
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	110 W
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Ethernet LAN	Yes
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	325 mm
Width	369 mm
Height	348 mm
Weight	2300 g
Package depth	430 mm
Package width	520 mm
Package weight	9070 g