Polycom CX5100 Administrator's Guide

Polycom CX5100 Unified Conference Station for Microsoft Skype for Business - Administrator Guide
Polycom, Inc. 18
● lcl.datetime.time.24HourClock
● tcpIpApp.sntp.address
● tcpIpApp.sntp.address.overrideDHCP
● tcpIpApp.sntp.gmtOffset
● tcpIpApp.sntp.gmtOffset.overrideDHCP
● device.prov.serverName.set
● device.prov.serverName
● device.masterConfigFile.LogFileDirectory
For more information on these parameters, see Configuration Parameter section in the Polycom® CX5500
Unified Conference Station for Skype™ for Business Administrator Guide
Configure the RealPresence Resource Manager to Provision the
CX5100 System
Before you begin to configure the RealPresence Resource Manager (RPRM) to provision the CX5100
unified conference station, make sure you do the following:
● The device.prov.lyncDeviceUpdateEnabled parameter value must be set to 0.
You can also export the CX5100 system device settings configuration file through Web Configuration
Utility to set the value of the parameter.
● The Base Profile for the CX5100 unified conference station is set to Generic.
● The RealPresence Resource Manager, 10.1 and above, supports provisioning the CX5100 unified
conference station.
You can configure the RPRM server to provision the CX5100 system, allowing you to perform a software
upgrade and monitor the online/offline devices using the following methods:
● Provision the CX5100 system using FTP
● Provision the CX5100 system using the Web Configuration Utility
Provision the CX5100 System using FTP
You can configure the RPRM server to provision the CX5100 system through FTP by storing the
configuration files in the FTP root directory.
To provision the CX5100 system using FTP:
1 Configure the FTP server address, username and password to store configuration files.
2 Prepare the following files to configure RPRM as the management server:
 <MACaddress>.cfg
Note: You won’t find the device.prov.lyncDeviceUpdateEnabled parameter in the CX5100
system’s device settings configuration file if the value of this parameter is already set to 0.

Polycom CX5100 Specifications

General

Product type	Group video conferencing system
Product color	Black
Number of persons	- person(s)
Megapixel	2 MP
Sensor type	-
Image sensor size	- \
Supported video modes	1080p
Supported graphics resolutions	352 x 288, 640 x 480 (VGA), 1056 x 144, 1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Frequency range	160 - 22000 Hz
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	15 - 85 %
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	110 W
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Ethernet LAN	Yes
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	325 mm
Width	369 mm
Height	348 mm
Weight	2300 g
Package depth	430 mm
Package width	520 mm
Package weight	9070 g