Polycom CX5100 - Profile

Configuration Parameters
Polycom, Inc. 73
<profile/>
Profiles are a collection of related security parameters. The next table lists TLS profile parameters. There
are two platform profiles and six application profiles.
sec.TLS.webServer.cipherList
String RSA:!EXP:!LOW:!NULL:!MD5:!RC4:@STR
ENGTH
The cipher list for a web server profile.
TLS Profile Parameters
Parameter Permitted Values Default
sec.TLS.profile.x.caCert.application1
Application CA 1
sec.TLS.profile.x.caCert.application2
Application CA 2
sec.TLS.profile.x.caCert.application3
Application CA 3
sec.TLS.profile.x.caCert.application4
Application CA 4
sec.TLS.profile.x.caCert.application5
Application CA 5
sec.TLS.profile.x.caCert.application6
Application CA 6
sec.TLS.profile.x.caCert.application7
Application CA 7
sec.TLS.profile.x.caCert.platform1
Platform CA 1
sec.TLS.profile.x.caCert.platform2
Platform CA 2
0 or 1
0 or 1
0 or 1
0 or 1
0 or 1
0 or 1
0 or 1
0 or 1
0 or 1
1
1
1
1
1
1
1
1
1
Specify which CA certificates should be used for TLS Application Profile x (where x is 1 to 7). If set to 0, the CA is not
used. If set to 1, the CA is used.
sec.TLS.profile.x.caCert.defaultList String Null
The list of default CA certificates for TLS Application Profile x (x= 1 to 7).
sec.TLS.profile.x.cipherSuite String Null
The cipher suite for TLS Application Profile x (where x is 1 to 7).
sec.TLS.profile.x.cipherSuiteDefault 0 or 1 1
If 0, use the custom cipher suite for TLS Application Profile x (x= 1 to 7). If 1, use the default cipher suite.
TLS Parameters (continued)
Parameter Permitted
Values
Default