Polycom CX5100 - Srtp

Configuration Parameters
Polycom, Inc. 68
<encryption/>
The next table lists available encryption parameters.
<pwd/><length/>
The next table lists configurable password length parameters.
<srtp/>
As per RFC 3711, you cannot turn off authentication of RTCP. The next table lists SRTP parameters.
File Encryption Parameters
Parameter Permitted Values Default
sec.encryption.upload.config 0 or 1 0
The encryption on the system-specific configuration file created and uploaded to the provisioning server.
If 0, the file is uploaded unencrypted, and overwrites whatever system-specific configuration file is on the server,
even if the file on the server is encrypted. If 1, the file is uploaded encrypted and replaces any existing
system-specific configuration file on the server. If there is no encryption key on the system, the file is not uploaded.
sec.encryption.upload.overrides 0 or 1 0
The encryption on the system-specific <MACaddress>-system.cfg override file that is uploaded to the server.
If 0, the file is uploaded unencrypted regardless of how it was downloaded, the file replaces whatever file was on the
server, even if the file on the server is encrypted. If 1, the file is uploaded encrypted regardless of how it was
downloaded. The file replaces any existing system-specific override file on the server.
1
Change causes system to restart or reboot.
Password Length Parameters
Parameter Permitted Values Default
sec.pwd.length.admin
1
0-32 1
The minimum length for administrator passwords changed using the system. Use 0 to allow null passwords.
sec.pwd.length.user
1
0-32 2
The minimum length for user passwords changed using the system. Use 0 to allow null passwords.
1
Change causes system to restart or reboot.
SRTP Parameters
Parameter Permitted values Defaults
sec.srtp.enable
1
0 or 1 1
If 0, the system always declines SRTP offers. If 1, the system accepts SRTP offers.