Configuration Parameters
Polycom, Inc. 76
<ice/>
Parameters in the following table enable you to set the STUN/TURN/ICE feature.
<sntp/>
The next table lists the Simple Network Time Protocol (SNTP) parameters used to set up time
synchronization and daylight savings time. The default values enable and configure daylights savings time
(DST) for North America.
Daylight savings time defaults:
● Do not use fixed day, use first or last day of week in the month.
● Start DST on the second Sunday in March at 2am.
ICE Parameters
Parameter Permitted Values Default
tcpIpApp.ice.mode Disabled, Standard,
MSOCS
Disabled
Turn SIP ICE negotiation on or off. If using Lync Server 2010, set to MSOCS to enable ICE.
tcpIpApp.ice.password String Null
Enter the password to authenticate to the TURN server.
tcpIpApp.ice.stun.server String Null
Enter the IP address of the STUN server.
tcpIpApp.ice.stun.udpPort 1-65535 3478
The UDP port number of the STUN server.
tcpIpApp.ice.tcp.enabled 0 or 1 1
If 0, TCP is disabled. If 1, TCP is enabled.
tcpIpApp.ice.turn.callAdmissionControl.enabled 1
tcpIpApp.ice.turn.server String Null
Enter the IP address of the TURN server.
tcpIpApp.ice.turn.tcpPort 1-65535 443
The UDP port number of the TURN server.
tcpIpApp.ice.turn.udpPort 1-65535 443
The UDP port number of the TURN server.
tcpIpApp.ice.username String Null
Enter the user name to authenticate to the TURN server.