Polycom CX5100 - Profileselection; Tcpipapp; Dhcp

Configuration Parameters
Polycom, Inc. 74
<profileSelection/>
You can configure the parameters listed in the next table to choose the platform profile or application profile
to use for each TLS application.
The permitted values are:
● PlatformProfile1
● PlatformProfile2
● ApplicationProfile1
● ApplicationProfile2
● ApplicationProfile3
● ApplicationProfile4
● ApplicationProfile5
● ApplicationProfile6
● ApplicationProfile7
<tcpIpApp/>
This parameter includes:
● <dhcp/>
● <dns/>
sec.TLS.profile.x.deviceCert Polycom, Platform1, Platform2,
Application1, Application2, Application3,
Application4, Application5, Application6,
Application7
Polycom
The device certificate to use for TLS Application Profile x (x = 1 to 7).
TLS Profile Selection Parameters
Parameter Permitted Values Default
sec.TLS.profileSelection.LDAP a TLS profile PlatformProfile1
The TLS platform profile or TLS application profile (see preceding list) to use for the Corporate Directory.
sec.TLS.profileSelection.SIP a TLS profile PlatformProfile1
The TLS platform profile or TLS application profile (see preceding list) to use for SIP operations.
sec.TLS.profileSelection.syslog PlatformProfile1 or
PlatformProfile2
PlatformProfile1
The TLS platform profile to use for syslog operations.
TLS Profile Parameters (continued)
Parameter Permitted Values Default