Configuration Parameters
Polycom, Inc. 61
Logging Level, Change, and Render Parameters
Parameter Permitted Values Default
log.level.change.xxx 0 to 6 4
Control the logging detail level for individual components. These are the input filters into the internal memory-based
log system. Possible values for xxx are acom, ares, app1, bluet, bdiag, brow, bsdir, cap, cdp, cert, cfg, cipher, clink,
clist, cmp, cmr, copy, curl, daa, dapi, dbs, dbuf, dhcpc, dis, dock, dot1x, dns, drvbt, ec, efk, ethf, flk, h323, hset,
httpa, httpd, hw, ht, ib, key, ldap, lic, lldp, loc, log, mb, mobil, net, niche, ocsp, osd, pcap, pcd, pdc, peer, pgui, pmt,
poll, pps, pres, pstn, ptt, push, pwrsv, rdisk, res, rtos, rtls, sec, sig, sip, slog, so, srtp, sshc, ssps, style, sync, sys, ta,
task, tls, trace, ttrs, usb, usbio, util, utilm, wdog, wmgr, and xmpp.
log.level.change.prox 0 - 6 4
Initial logging level for the Proximity log module.
log.level.change.ptp 0 - 6 4
Initial logging level for the Precision Time Protocol log module.
log.render.file 0 or 1 1
Set to 1. Polycom recommends that you do not change this value.
log.render.file.size positive integer, 1 to 180 32
Maximum size of flash memory for logs in Kbytes. When this size is about to be exceeded, the system uploads all
logs that have not yet been uploaded, and erase half of the logs on the system. The administrator may use web
browser to read all logs on the system.
log.render.file.upload.append 0 or 1 1
If set to 1, use append mode when uploading log files to server.
Note: HTTP and TFTP don’t support append mode unless the server is set up for this.
log.render.file.upload.append.limitMode delete, stop delete
Behavior when server log file has reached its limit. delete=delete file and start over stop=stop appending to file
log.render.file.upload.append.sizeLimit positive integer 512
Maximum log file size that can be stored on provisioning server in Kbytes.
log.render.file.upload.period positive integer 172800
Time in seconds between log file uploads to the provisioning server.
Note: The log file is not uploaded if no new events have been logged since the last upload.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
