(Adapted by Atlantic Broadband)
All nearby devices in discovery mode are added to the list, and the Bluetooth icon is displayed next
to each unpaired headset.
6
Select your headset and tap Add to begin the pairing process.
After your headset is added, the Bluetooth Available icon is displayed.
7
Select your headset and select Connect.
The Bluetooth Headset icon is displayed next to your headset after the headset is paired and
connected. The Bluetooth Headset icon is also displayed in the status bar. If you select the icon, the
Bluetooth Settings screen is displayed.
R
ELATED INFORMATION:
Bluetooth Headset
Managing Calls with Your Bluetooth Headset
When your Bluetooth headset is turned on, paired, and connected with your phone, you can perform the
following tasks:
●
Use the headset to handle calls, including muting and adjusting the call volume.
●
Initiate and end calls on your headset by pressing the Headset key , or using a control on the
headset.
●
Switch to handset or speakerphone mode during a headset call by picking up the handset or pressing
the Speakerphone key .
When you turn the headset off, the headset is no longer connected but remains paired to your phone. When
you turn the headset back on, the headset is reconnected.
Disconnect and Remove Your Bluetooth Headset
You can disconnect your headset from your phone, but still keep it paired. When you disconnect a headset,
it remains paired so you can easily connect it to your phone again.
You can also remove your headset so that it is no longer paired or connected. When you remove your
headset, it won't display in the Manage BT Headsets screen. To connect it back to your phone, you'll need
to scan for the device, add it, and connect it again.
TASK
1
Navigate to Settings > Basic > Bluetooth Settings > Manage BT Headsets.
2
From the Manage BT Headsets screen, select your headset, and select Disconnect.
Your headset remains paired to your phone but is no longer connected.
3
Select your headset, and select Remove.
Your headset is removed from the list and is no longer paired or connected with your phone.
You can quickly disconnect your headset by turning your headset off. When you turn it off, the
message “Headset removed” is displayed. When you turn your headset back on, the headset is
connected again.
To Next Page
Loading...
