(Adapted by Atlantic Broadband)
Enter a number between 1 minute and 10 minutes. The default is 1 minute.
4
Select User Input Idle Timeout, and enter the number of minutes the phone should wait after a key
press or screen select before starting power-saving mode.
Enter a number between 1 minute and 10 minutes. The default is 10 minutes.
5
Select Save.
R
ELATED INFORMATION:
Using Power-Saving Mode
Change Your Office Hours
Changing Audio Settings
You control certain audio settings on your phone, including the ringtone for incoming calls from all contacts
or a specific contact, where call notifications play, and the volume or the ringtone or call audio.
RELATED INFORMATION:
Features for Hearing-Impaired Users
Change the Volume
Enable Electronic Hookswitch
Change Incoming Call Notifications
You can choose whether you hear sound effects—all phone sounds except call audio—from the handset,
headset, speaker, or the active audio device you set. For example, you can configure your phone to ring on
your headset instead of the speaker. By default, you hear all sound effects from the speaker.
TASK
1
Navigate to Settings > Basic > Preferences > Audible Ringer.
2
From the Audible Ringer screen, select a location to hear sound effects:
Set a Ringtone for Incoming Calls
A simple way to personalize your phone is to change your phone's ringtone. You can pick unique ringtones
for the different lines on your phone. The default ringtone is Low Trill.
TASK
1
Navigate to Settings > Basic > Ring Type.
2
When there are multiple lines on your phone, select a line.
3
From the Ring Type screen, select a ringtone.
4
Select Play to hear the ringtone.
Set a Ringtone for Individual Contacts
You can select unique ringtones for various contacts in your directory. This helps you quickly identify callers
as your phone rings.
To Next Page
Loading...
