(Adapted by Atlantic Broadband)
Enable Transparent Line Keys
By default, your phone displays line keys with a background. If you have a background picture set on your
VVX phone, the background is partially or fully covered depending on the number of line keys you have. On
VVX 500 and 600 phones, you can change line keys to have a transparent background that
enables you
to fully see the background you set for your phone.
TASK
1
Navigate to Settings > Basic > Preferences > Idle Screen Settings.
2
On the Idle Screen Settings screen, select Transparent Lines, and select Enabled.
The line keys are displayed without a background, as shown next.
Screen Savers
Another way to personalize your phone is to enable a screen saver that can either show default pictures
stored on your phone, the idle browser, or pictures stored on a USB flash drive. Ask your system
administrator if this feature is available on your phone.
Enable Screen Savers
The screen saver automatically starts each time your phone is idle for a certain amount of time. When you
enable the screen saver, you can choose to have your phone either display default photos stored on the
phone, or the idle browser.
You can stop the screen saver at any time by pressing any key or touching the screen. When your phone is
idle again for a specified period of time, the screen saver starts again.
TASK
1
Navigate to Settings > Basic > Preferences > Screen Saver.
2
From the Screen Saver screen, select Screen Saver and select Enabled.
3
Select Wait Time and enter the number of minutes the phone can wait after no activity before
displaying the screen saver.
You can enter any time between one and 9999 minutes. The default time is 15 minutes.
4
Select Type and select either Default or Idle Browser.
5
Press Save.
R
ELATED INFORMATION:
View the Idle Browser
To Next Page
Loading...
