(Adapted by Atlantic Broadband)
Reject Calls with Do Not Disturb on Multiple Lines
By default, the Do Not Disturb feature applies to all lines on your phone. Your system administrator can set
up your phone so that you can enable the feature on a per-line basis.
TASK
1
Select DND.
2
Select Set All to enable DND for all lines.
Reject Calls with Do Not Disturb on One Line
If enabled, you can choose to enable DND for a particular line and not all lines.
TASK
1
Select DND.
2
From the Line Select screen, select a line.
3
From the Do Not Disturb screen, select Enable.
Redirecting Incoming Calls
You can redirect incoming calls by forwarding an incoming call to a contact, forwarding all incoming calls to
a contact, or diverting calls from a specific contact to another contact.
Forwarding Incoming Calls to a Contact
You can choose to forward an incoming call to a contact or forward all incoming calls to one of your contacts.
Note: When you are signed into a host phone as a guest, you can only forward calls if the server-based
Call Forwarding feature is enabled on the phone. If server-based Call Forwarding is disabled on the phone,
you cannot forward calls to a contact from the host phone. Contact your system administrator for help
enabling this feature.
Forward an Incoming Call to a Contact
You can forward an incoming call directly to a contact without answering the call. You cannot forward calls
in this way on shared lines.
TASK
1
In the Incoming Call screen, select Forward.
2
From the Call Forwarding screen, enter the forwarding number, and select Forward.
To Next Page
Loading...
