Polycom VVX 201 - Holding and Resuming Calls; Hold a Call; Resume a Call; Resume a Call on a VVX Expansion Module

Polycom, Inc.
(Adapted by Atlantic Broadband)
33
Audio Calls
TASK
1 During a call, including a conference call, press .
The other parties cannot hear you.
2 Press again to unmute the microphone.
Holding and Resuming Calls
When you are in a call, you can place a call on hold and resume the call.
RELATED INFORMATION:
Holding or Passing Calls
Hold a Call
You can place any active call on hold.
» During an active call, select Hold.
If you're in the Calls screen, highlight the call first.
A hold icon is displayed on the line of the held call, and a red LED light flashes on the line key for
all phones except VVX 201 phones.
Resume a Call
You can view and resume all held calls in the Active Call, Lines, and Calls screens.
» Do one of the following:
 Select Resume.
 From the Calls screen, select the call to highlight it, and select Resume.
Resume a Call on a VVX Expansion Module
You can resume calls placed on hold by other contacts from your VVX Expansion Module. A flashing red
LED light on a line key on the expansion module indicates a call is on hold on the contact's line.
» Press the line key corresponding to the line with the held call.
End an Active Audio Call
You can end an active call on your phone at any time.
» Do one of the following:
 Place the handset on the cradle.
 Press End Call.
 In the Calls screen, highlight the call and press End Call.