(Adapted by Atlantic Broadband)
VVX Camera LED Indicators
LED State Phone State
No LED One of the following:
●
Phone has no power
●
Camera shutter is closed
Flashes red and green Camera is booting up
Flashes amber and green Camera firmware is updating
Flashes green Incoming video call
Green Video call is connected
Amber One of the following:
●
Incoming call (no video or audio-only)
●
Outgoing call
●
Audio call is connected
●
Video is muted
●
Held call
●
Camera shutter is open, but video is not
enabled and camera is not selected
VVX Camera Messages
Message Action
VVX Camera attached. Firmware sync in progress, do
not remove camera.
Your camera is upgrading. Do not remove your camera
during this process. The upgrade is complete when you
receive a message stating that either “firmware sync
complete” or “upgrade failed”.
VVX Camera firmware sync complete. Camera ready. Indicates that your camera is ready to use.
VVX Camera firmware sync complete. Contact
administrator to enable video.
Indicates that your camera is ready to use. However,
your phone is not enabled to send and receive video.
Contact your system administrator to enable video calls.
VVX Camera firmware sync complete. Camera
rebooting.
Indicates that the camera firmware sync is finished, and
your camera is in the process of rebooting.
VVX Camera firmware sync complete. Video available
when next idle.
Indicates that your camera is ready to use for your next
video call.
VVX Camera attached, camera ready. Indicates that your camera is ready to use.
VVX Camera attached. Contact administrator to enable
video.
Indicates that your camera is ready to use. However,
your phone isn't enabled to send and receive video.
Contact your system administrator to enable video calls.
To Next Page
Loading...
