SECTION 00 : GENERAL INFORMATION
PA1621 Maintenance Manual All Series | January 2017
5
STEEL with STAINLESS STEEL ou STAINLESS STEEL with STAINLESS STEEL WELDING
CAUTION
Before welding, perform multiplex modules disconnection procedure.
NOTE
Welding surfaces must be free of scale, slag, rust, paint, grease, humidity or other foreign material that
would render welding impossible.
DANGER
Only a qualified and experienced person must do welding.
o GMAW (Gas Metal-Arc Welding) process;
o Welding wire conforms to AWS (American Welding Standards) A5.9 specifications;
o 308LSi type welding wire with 0.035" diameter (0,9 mm);
To Next Page
Loading...
Need help?
General
