SECTION 11: REAR AXLES
PA1621 Maintenance Manual All Series | January 2017
3
1. TORQUE TABLES
1.1 MERITOR DRIVE AXLE
MERITOR DRIVE AXLE
No DESCRIPTION TORQUE
1 Breather 12-18 lb-pi (16-24 Nm)
2 Fill / Level check plug 35 lb-pi (47 Nm) minimum *
3 Drain plug 35-50 lb-ft (47-68 Nm)
4 Drive shaft flange nuts 5/8-18 150-230 lb-ft (203-312 Nm)
5 Hub to disc cap screws 9/16-18 110-165 lb-ft (149-224 Nm)
* Minimum value, tighten until only one full plug thread is visible.
To Next Page
Loading...
Need help?
General
