PowerMeasuringModule PMM
35,0(6
83
Revision 13 EN - 02/2023
15.3.1 Warning messages
DANGER
Serious eye or skin injury due to laser radiation
If the protective window is not correctly positioned, reflections can cause directional laser radiation.
Ensure that the new protective window is positioned evenly in the indentation of the device/ex-
changeable cassette.
CAUTION
Burns due to hot surface
After a measurement the absorber below the protective window/exchangeable cassette is hot.
Under the protective window/exchangeable cassette is an opening with the absorber. Touching the
hot absorber can cause serious burns.
Do not clean or exchange the protective window directly after a measurement.
Let the device cool down for an adequate period of time.
Do not grab inside the opening under the protective window/exchangeable cassette.
NOTICE
Damage/Destruction of the device
Contamination and fingerprints on the protective window can lead to damage or destruction of the
protective window during measuring operation.
Only clean or exchange the protective window in a dust-free environment.
Do not touch the protective window with bare hands.
When exchanging the protective window wear suitable gloves.
To Next Page
Loading...
