SUPERVISOR PROCEDURES
PROCLEIX
®
TIGRIS System Operator’s Manual 5-25
Volume I: Operating the Instrument
Part # 902649EN Rev. A
Line Content for HIV-1 Discriminatory Assay LIS Files
Each tube data line in the HIV-1 Discriminatory Assay LIS export contains the following fields,
separated by a comma or tab (literal values are given in quotes):
Field Contents Max Length
Sample ID For specimens, this is the barcode ID. Calibrators,
PROCLEIX
®
TIGRIS Controls, and EQCs are
labeled as follows, where “xxxxxx” is the six-digit
lot number included in the barcode ID:
♦ Negative Calibrator: “Negative
Calibrator – Lot xxxxxx”
♦ HIV-1 Positive Calibrator: “HIV-1
Positive Calibrator – Lot xxxxxx”
♦ Negative EQC: “EQC Negative – Lot
xxxxxx”
♦ HIV-1 Positive EQC: “EQC HIV-1
Positive – Lot xxxxxx”
♦ PROCLEIX ULTRIO
®
and PROCLEIX
ULTRIO
Plus
®
TIGRIS Negative
Control: “Negative Control – Lot xxxxxx”
♦ PROCLEIX ULTRIO
®
and PROCLEIX
ULTRIO
Plus
®
TIGRIS HIV-1 Control:
“HIV-1 Positive Control – Lot xxxxxx”
59
Overall Interpretation Calibrators and PROCLEIX TIGRIS Controls:
“Valid” or “Invalid”
Specimens and EQCs:
“Invalid”, “NonReactive”, “Reactive”, “Suspect”
254 (13 typical)
Assay Name
PROCLEIX
®
HIV-1 Discriminatory Assay:
“dHIV-1”
PROCLEIX
ULTRIO
Plus
®
HIV-1 Discriminatory
Assay:
“UP dHIV-1”
The assay name in the LIS file may not match
on-screen references.
254 (15 typical)
Worklist ID Worklist ID (Run number). 6
Run Date & Time Date and time run was completed in the format:
YYYY-MM-DD HH:MM:SS
19
Tube Status Codes Status codes (if any) associated with the tube.
Codes are separated by a single space. See
"Appendix A. Status Codes" for code definitions.
254 (10 typical)
Internal Control RLU RLU value as a string. 20
Internal Control Result “Valid” or “Invalid”. 254 (7 typical)
Analyte RLU RLU value as a string. 20
Analyte S/CO S/CO as a string. 20
Kinetic Index Kinetic Index as a string. 20
Operator Username Login Username of the operator. 8
Internal Control Cutoff Minimum Internal Control RLUs for Valid IC. 20
Analyte Cutoff Minimum RLUs required from specimen to be
reactive.
20
To Next Page
Loading...