SUPERVISOR PROCEDURES
PROCLEIX
®
TIGRIS System Operator’s Manual 5-3
Volume I: Operating the Instrument
Part # 902649EN Rev. A
Editing an Operator Account
To edit an existing operator account:
1. Select the operator account on the Operators
grid.
2. Click Edit….
An Edit Operator
window opens, showing the current properties of the account.
3. Make changes to the operator name, password, and/or rights as needed.
4. Click OK to save the changes.
5. Changes take effect immediately.
Viewing an Operator Account
To see the rights assigned to an account without editing the account:
1. Select the account to be viewed on the Operators
grid.
2. Click View Rights….
A View Operator Rights
window opens, which lists the operator name, username, and
rights assigned to the account.
3. Click OK to exit.
To view a list of all operator accounts and the rights assigned to them, print the Operator Rights
Report (see “Operator Rights Report” on page 6-8).
Activating or Inactivating an Operator
All operator accounts have a status of “Active” or “Inactive.” An operator with an active account
can log on to and use PROCLEIX
®
TIGRIS System software. An inactive account exists in the
PROCLEIX TIGRIS System database, but the operator cannot log on until a system administrator
activates the account.
To change the status of an account:
1. Select the account whose status is to be changed on the Operators
grid.
2. Click Change Status.
The Active/Inactive status for the operator changes on the grid on the Operators
tab.
Deleting an Operator Account
To remove an existing operator account:
1. Select the account to be deleted on the Operators
grid.
2. Click Delete.
A Delete Operators
dialog box opens.
3. Click OK to confirm the deletion of the operator account.
The selected operator account is deleted from the Operators
grid.
Note: Usernames cannot be changed.
To Next Page
Loading...