SETTING UP THE INSTRUMENT
PROCLEIX
®
TIGRIS System Operator’s Manual 2-5
Volume I: Operating the Instrument
Part # 902649EN Rev. A
The Current Activity displays which processing step the system is performing. The activities are
listed below in Table 2.5:
Table 2.5 System Activities
Activity Meaning
Correcting Racks
The system is verifying that the operator has resolved all Sample
ID or sample rack barcode errors.
Doing Maintenance The system is performing a maintenance activity.
Error Processing
Complete. OK to
Shutdown
The system has completed error processing, and the system can
now be shut down.
Hardware Reset in
Progress
A system hardware reset is in progress.
Initializing the Procleix
TIGRIS System
The system is initializing.
Loading MTUs The system is loading MTUs.
Loading Racks The system is loading sample racks.
Performing AR Inventory The system is validating the AR inventory.
Performing Fluid
Inventory
The system is performing an inventory of the Lower Bay fluids.
Pipetting The Sample Pipettor is pipetting wTCR or sample.
Priming Fluids The system is priming the fluid lines in the Lower Bay.
Processing Error. Please
Wait
An error has stopped all system activity.
Processing Results for
Worklist xxx
The system is finalizing results.
Scanning Racks
The system is scanning and verifying sample racks and sample
tubes.
Starting the Analyzer The system is initializing the analyzer.
Stopping Operations Will
Restart Analyzer When
Complete
The system has or stopped pipetting samples at user direction
(Stop All).
Unload in Progress The system is unloading all MTUs.
To Next Page
Loading...