SECTION 6
6-6 PROCLEIX
®
TIGRIS System Operator’s Manual
Part # 902649EN Rev. A Volume I: Operating the Instrument
To generate the Sample Results Report:
1. In the Worklists
grid, select a worklist that contains the sample.
The Worklist Details
displays a list of the samples in a worklist.
2. In the Worklist Details
grid, select the sample.
3. Click View Sample Report....
The system generates a Sample Results Report for the sample.
The first section of the report lists summary information:
♦ Sample ID
♦ Instrument serial number
♦ System software version
Test result information is organized by Worklist ID:
♦ Run Start Date and Time
♦ Assay
♦ Internal Control RLU
♦ Internal Control Results
♦ Analyte RLU
♦ Analyte S/CO
♦ Overall interpretation
♦ Flags
Below the list of test results is a legend for the Flags associated with each worklist, and a
legend for any tests that were rejected by an operator in each worklist.
To Next Page
Loading...