Chapter 5: WebPAM
77
4. Click the Enable option.
5. Click the by Day, by Week or by Month option.
From the dropdown menus, select a start time and a day of the Week or
Month, if applicable.
Start time is based on a 24-hour clock.
6. Click the Schedule button.
To cancel the scheduled Media Patrol operation:
1. Click the Physical Drive View icon in Tree View.
2. Click the Physical Drive icon.
3. Click the Media Patrol tab in Management View.
4. Click the Disable option.
Checking the Bad Sector Log
On occasion, an error can arise with the media on a physical drive. WebPAM
keeps track of bad sectors in order to inform you of the condition of individual
physical drives.
To check a physical drive’s bad sector log:
1. Click the Physical Drive View icon in Tree View.
2. Click the Physical Drive icon.
3. Click the BSL tab in Management View.
To Next Page
Loading...
Need help?
General
