Proscend M350 Series - Page 108

M350 Series User Manual 108
Prepare the authentication IDs
1. Navigate to the Authentication IDs tab.
2. Add tow authentication IDs
 Keep first one's ID as blank, Type as RSA and select the C=CN, O=Company,
CN=local.IPsec X.509 certificate.
 Keep second one's ID as blank, Type as RSA and select the C=CN, O=Company,
CN=remote.IPsec X.509 certificate.
3. Apply the changes
Setup the connection on VPN server
1. Change Mode from Disable to Enable.
2. Navigate to the Connections tab.
3. Add IPsec connection
(1) Edit the phase 1 setting
(2) Change Mode from Disable to Enable.
(3) Change Auth Type from PSK to RSA.
(4) Change the Local ID and select the local.IPsec (RSA)authentication ID.
(5) Save the changes
(6) Edit the phase 2 setting
(7) Fill up the Local Subnet and Remote Subnet.
 e.g. Local Subnet: 192.168.100.0/24, Remote Subnet: 192.168.200.0/24
(8) Save the changes