M350 Series User Manual 128
Black List: When set as Black List, the specific IP address/port in rule will be blocked.
White List: When set as White List, the specific IP address/port in rule will be accepted.
Management IP Address:
For White List only.Since White List will block all user communication except those has been
assigned by rules, it is better to assign a specific IP address for the administrator to access the
Router which is Management IP Address.
Service Ports:
For White List only. The setting is specified for Router access only. The user can set it to allow
Router access outside WAN or inside LAN Service. For example, access outside WAN DNS service.
It also allows user to access Router service from outside WAN or inside LAN. For example, access
Router Web service.