Proscend M350 Series User Manual

M350 Series User Manual 129
Edit Black/White List
(1) Click button to edit Black/White list.
(2) The default is Disablemode as the following interface (Black/White).
Firewall > IP Filter
Item
Description
Mode
Select from Disable or Enable. The default is Disable.
Protocol
Select from All, ICMP, TCP or UDP.
Source IP
Fill in your source IP address.
Source Port
Fill in your source port.
Destination IP
Fill in your destination IP address.
Destination Port
Fill in your destination port.
(3) When selecting Enable Mode, the protocol is TCP. The source IP has IPv4 and IPv6setting
formats.
(4) For Source IP, there are three types to input your source IP that depends on your requirement,
including single IP, IP with Mask or giving a range of IP. The following table provides some
examples.
Firewall > Edit IP Filter > Source IP
IP Format
Single IP
IP with Mask
Ranged IP
IPv4
192.168.0.123
192.168.1.0/24
192.168.1.0/255.255.255.
192.168.1.1-192.168.1.123
IPv6
2607:f0d0:1002:51::4
2607:f0d0:1002:51::0/64
2607:f0d0:1002:51::4-
2607:f0d0:1002:51::aaaa

Proscend M350 Series Specifications

General

Brand	Proscend
Model	M350 Series
Category	Network Router
Language	English