M350 Series User Manual 181
The Server Address is required field, which indicate the Open VPN server address which Open
VPN client try to connect. And the PKCS12 Password only works when selected the pkcs #12
Certificate authentication option.
This option requires the P12 file which generated from Generic Setup Open VPN server part.
The password also be set on the Generic Setup Open VPN server part.
If you use the Certificate authentication option, the Open VPN client will require the Root CA, User
cert and User key files.
Same as the Open VPN server configuration part, Open VPN client web UI also provides the status
information. When all settings set up properly, the status will change from Idle to Running. When
Open VPN tunnel is created, the status shows Connected and the information for IP address and
the time.
To Next Page
Loading...
Need help?
General
