M350 Series User Manual 43
DHCP Client: DHCP server-assigned IP address, netmask, gateway, and
DNS.
PPPoE Client: Your ISP will provide you with a username and password.
This option is typically used for DSL services.
Static IPv4: User-defined IP address, netmask, and gateway address.
When selecting “DHCP Client”, you can set up DNS Server Configuration.
For IPv4 DNS Server, it provides three options to set up and each option has provided with “From
ISP”, “User Defined” and “None” to configure.
WAN > Ethernet > DHCP Client
IPv4 DNS Server #1
IPv4 DNS Server #2
IPv4 DNS Server #3
Each setting DNS Server has three options, including From ISP, User
Defined and None.
When you select From ISP, the IPv4 DNS server IP is obtained from
ISP.