Proscend M350 Series - Page 53

M350 Series User Manual 53
LTE >APN Config
Item
Description
Connect Policy
Connect Action
 Disconnect: When getting connection, the Disconnect button
appear. After manually click Disconnect, the system would not
automatically get connection until next reboot.
 Connect: After manually disconnect, it will show Connect button.
Click to get connection or reboot the device to make it automatically
connect.
Disable Roaming
 No: Make connection even the device is in roaming state.
 Yes: No connection when the device in roaming state.
Recover APN1
Recover APN1
 No: Not to recover when APN1 is continuous link down.
 Yes: Recover APN1 by using specified method.
When APN1
continuous link
down for xx times.
When link down number reach the specified number then the system
will proceed recover action.
 Reboot: Reboot the system.
 Recover to default APN: Replace active APN by using factory
default APN.
 Recover to previous working APN: Replace active APN by using
previous working APN.
SIM Configurations
Status
Display the status of SIM Card.
SIM PIN Enable
 Enable to display SIM PIN setting.
 Disable to hide SIM PIN setting.