Proscend M350 Series - Page 82

M350 Series User Manual 82
(2) Neighbor Configuration
The neighbors sub configuration is used to configure all the BGP routers to peer with and the
maximum neighbors is 16.
IP Routing > BGP > Neighbors
Item
Description
Mode
Select from Off or On to enable the neighbor setting.
IP Address
Set IP address of the peer router.
AS Number
Autonomous system number of the peer router.
Multihop
Allow multiple hops between this router and the peer router.
Update Source Mode
Whether to specify the source address to this neighbor.
Update Source Address
The source address to this neighbor.