Proscend M350 Series - Page 87

M350 Series User Manual 87
Netmask
The local netmask exported by OpenVPN. When keeping this option
blank, the OpenVPN will export the LAN netmask automatically.
NAT
1:1 NAT
 Tick to enable NAT Traversal for Open VPN. This item must be
enabled when the router under NAT environment.
 Select from Offor On.
 When two routers’ LAN Subnet are same and create Open VPN
tunnels, this function should be turned on.
Client-Security
Root CA
The Certificate Authority file of OpenVPN server could be
downloaded from OpenVPN server.
Cert
The certification file is for OpenVPN client, which could be
downloaded from OpenVPN server.
Key
The private key file is for OpenVPN client, which could be
downloaded from OpenVPN server.
P12
The PKCS#12 file is for OpenVPN client, which could be
downloaded from OpenVPN server.
Select option “Server” from VPN Mode, and this section allows you to configure the server status
of VPN Mode.
Note: When selecting the On option of Route Client Networks, the OpenVPN server will route the
client traffic or not.
You should fill in the client IP and netmask when this option is enabled.
11.1.3 Open VPN Server Setting