1-12
VIBXPERT 11.2010
Safety and operating notes
Read this section carefully, paying especially close attention to the
safety notes, before working with the device.
Symbols used
Danger to life and limb!
This symbol warns of operating errors that can
lead to data loss or equipment damage.
This symbol denotes information and tips on
operating the data collector.
Information related to VIBXPERT with intrinsic
safety.
Intended use
- The measurement device may only be used for the measurement of
machine signals in industrial environments while taking into
consideration the technical specifications (see " Technical data").
- Transducers and cables may be used only for their respective
intended uses as defined in the corresponding sales leaflets.
Any other use shall not be considered an intended use and is
impermissible. Incorrect or impermissible use and failure to observe
the instructions in this manual result in a loss of warranty from
PRÜFTECHNIK.
Safety
The following notes must be carefully read and completely under-
stood before the device is put into service.
Risk of injury when measuring on a running machine!
Observe the safety regulations. Install the measurement equip-
ment properly. During measurement on machines with rotat-
ing parts exposed, ensure that no brackets, cables etc. can
become caught in rotating machine parts.
Attention!
Note
Safety and operating notes
WARNING!
WARNING!
To Next Page
Loading...
Need help?
General
