PRÜFTECHNIK VIB 5.300 Series - Setting up the Network Communication

2-34
VIBXPERT 11.2010
Getting started - Data transfer
Setting up the network communication
• Connect VIBXPERT to the network (see above).
• Switch on VIBXPERT.
• Click on 'Device Setup' in the start screen, and then on 'Ethernet':
VIBXPERT WITHOUT INTRINSIC SAFETY: Connect the Ethernet cable VIB
5.331 to the communication port (green) and power socket.
VIBXPERT EX
WITH INTRINSIC SAFETY: Connect the adapter cable with the
green sleeve to the communication port (green). Connect the
adapter to the network connector with a straight patch cable.
Network connection
LAN
Ethernet
VIB 5.330 UNV
VIB 5.331
Ethernet
Device Setup
Left:
Open menu for
network communication
Right:
TCP/IP settings for
network communication