2-27
VIBXPERT 11.2010
Getting started - Basic settings
Deleting a print job
• Click on 'Print queue' in the 'Printer settings' menu.
• Select the print job in the list.
• Press the MENU key and click on 'Delete job'.
If a print job is being processed, a print icon appears at the top edge
of the screen.
Print job is being processed
Device Setup
VIB 5.330MUSB
USB (master)
Connecting the printer
Only printers with a USB interface can be connected to the measure-
ment device. Use the USB cable available as an accessory for I/O
devices to connect the printer (VIB 5.3330 MUSB).
To Next Page
Loading...
