2-36
VIBXPERT 11.2010
Getting started - Data transfer
Entering a fix IP address for the local PC
You must assign a fixed IP address to the computer if you connect the
computer directly to the measurement device with a patch cable (see
p. 2-32, 2-33):
• From the START menu, select SETTINGS, choose NETWORK and
DIAL-UP CONNECTIONS.
• Right-click on LOCAL AREA CONNECTION and select PROPER-
TIES.
• Select TCP/IP and click PROPERTIES.
• Select USE THE FOLLOWING IP ADDRESS.
• Enter the 'IP address' data for the local PC.
To Next Page
Loading...
