5-24
VIBXPERT 11.2010
Measurement tasks
The 'Import wizard' appears which is used to select the measurement
type, the measurement quantity and the measurement task in three
steps (see previous page). Transducer setup and evaluation setup of
the measurement task will be automatically applied.
Results screen
As soon as both measurements are completed, the blue LED lights up
if no thresholds have been exceeded or measurement errors have
occurred (see P. 2-2).
The functions that can be triggered via the keyboard only apply to
the active pane, which is indicated by a frame.
As well as the pane for channel A and channel B, the entire screen
also counts as a pane!
To evaluate or repeat one of the two measurements, activate the
corresponding pane as follows:
Dual task
(here: Spectrum / time signal)
Partial window for
channel A is selected
(black frame)
Note
B
B
A
B
B activated
B selected
A & B activated
A & B activated
A activated
A selected
A
A
A
B
Navigation in the Results screen
Frame color (gray/ black) indicates the
pane status
E
S
C
E
S
C
To Next Page
Loading...
Need help?
General
