2-11
VIBXPERT 11.2010
Getting started - Memory card
When the device is switched on, the card is automatically tested. The
following scenarios are possible:
Card formatted, which version?
- The card is new and has not yet been formatted in a VIBXPERT:
you are prompted to format the card.
- The card has already been used in another VIBXPERT:
Card version < firmware version in the device: the files on the
card are automatically updated.
Card version > firmware version in the device: you are prompted
to reset all settings to the "factory settings" ('Reset', P. 2-29).
Card version = latest firmware version: no action.
Card faulty?
- The file system on the card is damaged. A warning appears along
with the instruction to have the card repaired. If possible, make a
backup copy of the measurement data (see 'Backup', page 6-9).
Start card formatting and repair in the 'Service' menu (P. 2-29).
How much free memory capacity is there?
The free memory capacity is checked regularly during operation. A
message appears when the memory is almost full.
To Next Page
Loading...
Need help?
General
