Psion Teklogix Workabout PRO G2 - Chapter 2: Basic Checkout; 2.1 Preparing The WORKABOUT PRO G2 For Operation

WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual 9
BASIC CHECKOUT 2
2.1 Preparing The WORKABOUT PRO G2 For Operation . . . . . . . . . . 11
2.1.1 The Main Battery...........................11
2.1.1.1 Charging The Main Battery.................11
2.1.2 The Backup Battery. . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.2 Turning The WORKABOUT PRO G2 On And Off . . . . . . . . . . . . 12
2.2.1 Installing The Battery And Switching The Unit On . . . . . . . . . 12
2.2.2 Switching The Unit Off (Suspend)..................13
2.3 Calibrating The Touchscreen........................13
2.4 Configuring The RA2041 802.11b/g Radio. . . . . . . . . . . . . . . . . 13
2.4.1 Summit Client Utility (SCU) For Model RA2041 . . . . . . . . . . 13
2.4.2 Assigning The IP Address......................13
2.4.3 Name Servers Tab ..........................16
2.4.4 Using The SCU To Connect To The WLAN.............17
2.4.4.1 SSID.............................18
2.4.4.2 EAP Type..........................18
2.4.4.3 Encryption..........................18
2.5 SCU Tabs..................................19
2.5.1 Main Tab...............................20
2.5.2 Config Tab..............................20
2.5.2.1 SCU Security Capabilities..................23
2.5.2.2 EAP Credentials.......................25
2.5.2.3 ThirdPartyConfig......................26
2.5.3 Global Settings Tab..........................26
2.5.4 Status Tab...............................29
2.5.5 Diags Tab...............................30
2.6 Checking The Scanner...........................31
2.7 Using Microsoft® ActiveSync®......................31
2.8 Resetting The Hand-Held..........................31
2.8.1 Performing A Warm Reset......................31
2.8.2 Performing A Cold Reset – Accessing The BooSt Menu . . . . . . 32