Psion Teklogix Workabout PRO G2 - Upc a; Upc E; Code 93; Codabar

Chapter 5: Configuration
Imager
196 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual
5.11.5.7 UPC A
Enabled
Set this parameter to on to enable “UPC A”.
Addendum
Refer to “Addendum” on page 195.
Prefix/Suffix
Refer to “Prefix/Suffix” beginning on page 144.
5.11.5.8 UPC E
Enabled
Set this parameter to on to enable “UPC E”.
Addendum
Refer to “Addendum” on page 195.
Prefix/Suffix
Refer to “Prefix/Suffix” beginning on page 144.
5.11.5.9 Code 93
Enabled
Set this parameter to on to enable “Code 93”.
Field Size/Char
Refer to page 143 for details.
5.11.5.10 Codabar
Enabled
Set this parameter to on to enable “Codabar”.
Field Size/Char
Refer to page 143 for details.