Chapter 6: Peripheral Devices & Accessories
Protective Carrying Case
218 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual
• Tighten the screws to a torque of 3 lbs-in (3kgf-cm) to secure the pistol grip
in place.
6.1.3 Protective Carrying Case
A carrying case is available for WORKABOUT PRO G2s to shield the unit from
damage. It is equipped with a soft plastic window to protect the unit display and
keyboard. A variety of cases are available, depending on the type of end-cap
attached to your unit.
6.1.3.1 Using The Swivel Belt Loop With The Carrying Case
The WORKABOUT PRO G2 carrying case is equipped with two rings onto which
you can attach a swivel belt loop so that you can hang the unit from your belt. If you
prefer, you can also attach a belt clip to this accessory so that you can clamp the unit
onto your waistband or belt. (rather than slide your belt through the belt loop).
Figure 6.1 Belt Loop And Belt Clip
• Clip the two hooks on the belt strap to the bottom of the carrying case.
To Next Page
Loading...
