Pyronix 256 - Page 100

PCX SMS AND PCX 256 SYSTEM MANUAL
Page: 100 RINS871-3
Test Calls
Enter : for No
Enter : for Timed
(If Timed is chosen you will need to enter the hours
and minutes once you have pressed the Okey)
Press the Okey
ARC Details will be displayed. Repeat the above for
any other ARC stations you are using. Press the
Pkey. ‘Program Digi/SMS Calls?’ will be displayed,
press the Pkey.
Program Digi Channels
Press the Okey to check that the Digi Channels are
what the ARC are looking for.
The first Digi Channel will be shown, once you have
checked this is correct, press the Okey to move to
the next.
To change this channel please see page 75 for the
output types. All default values are shown on page 97
Once you have completed all the Digi Channels,
‘Program Digi Channels will be displayed’.
Press the Pkey.
‘Program SMS Details’ will be displayed and Press
the Pkey.
3 Way Calling
Enter : for No
Enter : for Yes
Press the Okey. You will be returned to the
Engineer Menu.