Pyronix 256 User Manual

PCX SMS AND PCX 256 SYSTEM MANUAL
Page: 106 RINS871-3
13.24 PABX Telephone Systems
Please note for PABX telephone systems (where a “9” is needed in order to dial an outside line), you must
put “NN” before the account number in the “account reference” part of the programming (see below). If you
haven’t been given an account number then the account reference “NN1111” would be OK to use. This
needs to be entered on the keypad.
Visual Keypad Programming Procedure
PROGRAMME DIGI/SMS
SMS Message
Programme Digi / SMS
Using the mand Pkeys, scroll to ‘PROGRAMME
DIGI/SMS’ Press the Okey
To program in a mobile number, press the Okey
Disable Digi/SMS
Enter : for No (Enables the Digi Modem)
Enter : for Yes
Press the Okey
Use the numeric keys to select the telephone number
details to program. Press the Okey
Active
Enter : for No
Enter : for Yes (Enables the ARC Details)
Press the Okey
Choose Format
Enter number 7 to choose ‘SMS Message’.
Press the Okey

Pyronix 256 Specifications

General

Brand	Pyronix
Model	256
Category	Security System
Language	English