Pyronix 256 User Manual

PCX SMS AND PCX 256 SYSTEM MANUAL
Page: 18 RINS871-3
4.4 DEFAULTS
Functions/Parameters Default Setting
CODES
PCX 26/SMS PCX 256
Engineer Code 9999 9999
User Code 1234 1234
Manager Code 5678 5678
CHOOSE MODE
PCX 26/SMS PCX 256
EOL Range - 4k7 Range
EOL Mode DEOL DEOL
Input Response 400 400
Input XDF Normal Normal
INSTALL RIX
PCX 26/SMS PCX 256
RIX Installed All addresses disabled All addresses disabled
CHANGE INPUTS
PCX 26/SMS PCX 256
All Input Types Unused Unused
Input Partitions A A
Input Partition Any Any
Chime No No
Omittable No No
Double Knock No No
Dual Trip No No
Normally Open No No
Monitor Activity - No
Special Log - No
Paired Input - No
Confirm Group 00 00
Input Name Input ### (Text String) Input ### (Text String)
ASSIGN KEYPADS/READERS
PCX 26/SMS PCX 256
Address 00 Keypad Keypad
All other addresses Not Used Not Used
Arm Point Arms - 0123456789ABCD
Arm Point Disarms - 0123456789ABCD
Arm Point In - A
Default Level A -
Arm Point Name Device ## (Text String) Device ## (Text String)
SYSTEM DISPLAYS
PCX 26/SMS PCX 256
Partition Text Partition # (Text String) Partition # (Text String)
Full Partition Text - Full (Text String)
Sign On Message PCX 26.V5.e (Text String) PCX 256.V5.e (Text String)
Site Name _ (Text String) _ (Text String)
Display When Arm - No
CHANGE TIMERS
PCX 26/SMS PCX 256
Entry Time 30 seconds (All partitions) 30 seconds (All partitions)
Exit Time 30 seconds (All partitions) 30 seconds (All partitions)
Bell Time 15 minutes 15 minutes
Confirm Time 30 minutes 30 minutes
Bell Delay Zero minutes Zero minutes
Strobe Time Zero minutes Zero minutes
Re-Arm No. 3 3
AC Signal Delay 40 minutes 60 minutes
Speaker Zero seconds Zero seconds
Final Exit Delay 5 seconds 5 seconds
Double Knock 10 seconds 10 seconds

Pyronix 256 Specifications

General

Brand	Pyronix
Model	256
Category	Security System
Language	English