Pyronix 256 User Manual

PCX SMS AND PCX 256 SYSTEM MANUAL
RINS871-3 Page: 153
APPENDIX F: USER / ENGINEER OPERATIONS
Anti Code / Engineer Reset
The system can be programmed so that it can be only fully reset by an engineer or by an anti-code reset
(ask your engineer to program this feature).
Engineer Reset
After an alarm activation (this example shows a personal attack), enter your user code, the alarm will silence
and the display will show the alarm that has just been activated.
The display will switch between the activation that has just occurred and ‘Restore Required’.
Press the
key. The following display will be displayed:
D
C
B
A
PCX 256.V5.e
Time 02:31 c
,/+.
JKL
ABC
MNO
DEF
PQRS
GHI
TUV
WXYZ
SPACE
The power LED will flash indicating that a restore is required. Enter your engineering code.
“All Faults Have Cleared” will be displayed. Press the
key twice, ‘Enter Code’ will be displayed. Press the
key to return to day mode.
Anti Code
After an alarm activation (this example shows a personal attack), enter your user code, the alarm will silence
and the following will be displayed:
D
C
B
A
Alarm Silenced
Restore G12298
,/+.
JKL
ABC
MNO
DEF
PQRS
GHI
TUV
WXYZ
SPACE
The restore number that is shown (for example G12298), will need to be given to your alarm receiving
station, in return they will supply you with a reset code.
¾ Press the
key.
¾ Enter the code the ARC have given you. ‘Engineer Reset Performed’ will be displayed.
‘Enter Your Code’ will be displayed, either enter your user code to arm/disarm the panel, or press the
key to reset to day mode.

Pyronix 256 Specifications

General

Brand	Pyronix
Model	256
Category	Security System
Language	English